Skip to content

Flaps


Back to Flight Deck


Flaps Panel

Controls

FLAPS lever

The FLAPS lever controls the operation of the slats and flaps.

The five lever positions correspond to the following surface positions :

Position Slats ° Flaps ° ECAM Max Speed Phase
0 0 0 CRUISE
1 18 0/10 1/1+F 230 kt HOLD / TAKE OFF
2 22 15 2 215 kt TAKE OFF / APPR
3 22 20 3 185 kt TAKE OFF / LDG / APPR
FULL 27 40 FULL 177 kt LDG

Before selecting any position, the pilot must pull the lever out of the detent. Stops at positions 1 and 3 prevent the pilot from calling for excessive flap/slat travel with a single action.

Note : The pilot cannot select an intermediate lever position.

Takeoff in CONFIG 1:

  • 1 + F (18° Slats / 10° Flaps) is selected. If the pilot does not select configuration 0 after takeoff, the flaps retract automatically at 210 knots.

Takeoff or go-around in CONFIG 2 or 3:

  • If the pilot selects CONFIG 1, he gets 1 + F (18°/10°) if airspeed is under 210 knots.
  • If the pilot does not select configuration 0 after takeoff, the flaps retract automatically at 210 knots.

CONFIG O to CONFIG 1 in flight:

  • CONFIG 1 ( 18° Slats / 0° Flaps) is selected.

Note: After flap retraction, CONFIG 1 + F is no longer available until the airspeed is 100 knots or less, unless CONFIG 2, 3, or FULL has been selected previously.


Back to Flight Deck


Last update: July 24, 2023